- Contact Person : Mr. Gu Jianzhong
- Company Name : Haining Jianuo Collector Tube Co., Ltd.
- Tel : 86-573-87805788,13806706297
- Fax : 86-573-87805111
- Address : Zhejiang,Haining,Huangwan Village(Dongxiao) Huangwan Town Haining City
- Country/Region : China
solar vacuum tube with Heat pipe 2012 NEW! ! ! ! Send Me inquiry ,Surprise waiting for you
Solar Heat pipe tube features:
1)fast start-up and response, it passes heat to water tank quickly. It can collect solar heat even in cloudy day.
2)It obtains high solar heat.
3)Hermetic seal in inner pipe. It can withstand high pressure. It can connect with system of tap water.
4)It stands against freeze weather.
5)it keeps warm for 24 hours.
6)Available size: 47mmX1500mm, 58mmX1800mm
7)Materials of tubes:copper,stainless steel,aluminum.
There are some advantages about the heat pipe type of vacuum tube sun water heater
Item Name | Item NO. | ||
Solar heat pipe | 58mm*1.8m | ||
Structure | All-glass double-tube co-axial structure | ||
Glass material | High borosilicate 3.3 glass | ||
External pipe diameter and thickness | dia.=47±0.7mm &=1.6mm dia.=58±0.7mm &=1.6mm | ||
Internal pipe diameter and thickness | dia.=37±0.7mm &=1.6mm dia.=47±0.7mm &=1.6mm | ||
Pipe length | 1500mm/1800mm | ||
Absorptivecoating property | Structure | Cu/SS-ALN(H)/SS-ALN(L)/ALN | |
Sediment method | 3 target magnertron sputtering plating | ||
Specific absorption | as=0.93~0.96(AM1.5) | ||
Emission ratio | 0.04~0.06(80°C±5°C) | ||
Vacuum tightness | P≤5.0×10-³Pa | ||
Idle sunning property parameters | Y= 280 ~ 300m²°C/KW | ||
Pressure-Endure Ability | 1.0Mpa | ||
Hail-Endure Ability | 25mm | ||
Lifetime | 15years | ||
Solar irradiation for obtaining a preset water temperature | H≤4.7 MJ/ m²(dia.58) | H=4.1~4.4 MJ/ m² | |
H≤3.7 MJ/ m²(dia.47) | H=3.1~3.4 MJ/ m² | ||
Average heat loss coefficient | Ult=0.3~0.5W/( m².°C) |
1>High Thermal Conductivity Heat conductivity of heat pipe is much higher than the common metal,,we can see that because inside the heatpipe it transfer heat by gas and liquid phase change heat, heat resistance is very small, so the axial heat conductivity is very high,while the radial heat conductivity is general.
2> Good Isothermal Performance When heat pipe is working, the working fluid temperature inside it is saturation, the saturated working fluid temperature is the same,but it will absorb or release a lot heat, therefore, heat pipe can transfer much heat under isothermal circumstances theoretically, whose outside behavior is the isothermal performance of heat pipe is very good. The axial temperature of heat pipe is almost the same.
3> Reversibility of Heat Flow A heat pipe with wick, if only the capacity is enough , it will begin transfer heat,so that it make the temperature of two ends tends to equal.
4> The heat pipe without wick like gravity-assisted heat pipe in solar water heater, in the absence of wick structure, the working fluid inside the pipe can just recycle by gravity, and the heat transferred from the bottom to the top and will not reverse so that get the heat lossed during night and winter.
5>Thermal Switches Properity When the heat pipe temperature is lower than the freezing point of working fluid, heat pipe will stop working; when heat pipe temperature is higher than the critical temperature, the pipe is filled with steam, there is no phase change heat transfer process inside the pipe, heat pipe will stop working, therefore, the heat pipe working temperature is between the freezing point and critical point.
6>Variability of Heat Flow Heat pipe can change the heat transfer area of the two ends independently, that is inputing heat through smaller heating area but outputing heat by larger cooling area, or vice verse; by doing this to change the heat flowden
solar vacuum tube with Heat pipe 2012 NEW! ! ! ! Send Me inquiry ,Surprise waiting for you